1980 Gleason 650 Hypoid Spiral Bevel Gear Generator

Contact us for price

Romania

orCall +4 021 223 03 45

Description

Model No. 650 GLEASON Hypoid Spiral Bevel
Gear Generating Machine

Suitable for the cutting of larger spiral bevel, hypoid,
and Zerol bevel pinions and mating gears up to
34” (863.6mm) diameter, 5” (127mm) face, with
1.08 DP (module 23.5) cutting capability

PRINCIPAL SPECIFICATIONS:
Extreme ratio 10:1
Roof angle range 0º to 90º
Gear diameter – Maximum 34” (863.6mm)
Examples of maximum gear pitch diameters
with 36ºgear spiral angle using19.7” (500mm)
cutter diameter (+) at the following ratios:
1 x 1 28.50” (723.90mm)
2 x 1 34.00” (863.60mm)
5 x 1 34.00” (863.60mm)
Maximum radial setting **15.00” **(381mm)
Full depth – Maximum 1.5” (38.1mm)
Face width – Maximum 5.000” (127mm)
Coarsest Pitch (module) 1.08 DP (23.5 module)
Index Range * 5 to 80 inclusive
Work spindle taper hole diameter at large end 6” (152.4mm)
Work spindle taper per foot 0.75” (19.0mm)
Work spindle depth of taper 6” (152.4mm)
Diameter through spindle of hole 5” (1270mm)
Cutter diameters utilized 9”, 10.5”, 12”, 14”, 16”, 18”
(200,250,320,400 & 500mm)
Work-head offset above center – Maximum ***4.5” (114.3mm)
Work-head offset below center – Maximum ***4.5” (114.3mm)
Machine center to hose of spindle – Max 23.5” (596.9mm)
Cutter speeds 6 to 167 RPM (stepless)
Cycle time, infinitely variable from 7 seconds/tooth minimum
Motors ( 60 Hz ) 50 Hz )
Cutter drive motor, 15HP 1800 RPM 1500 RPM
Hydraulic motor, 7.5HP 1200 RPM 1500 RPM
Coolant motor, 2HP 1200 RPM 1500 RPM
D.C. generating drive motor, 6HP 1200 RPM

in working condition

Specifications

ManufacturerGleason 650 Hypoid Spiral Bevel Gear Generator
Year1980
ConditionUsed